Gamewell / FCI XP95-P Sensor

Gamewell Photoelectric Detector / Apollo: 55000-650APO XP95 Detector / Apollo:  SA5150-650APO Soteria Detector 

$135.00

SKU: XP95-P

41 in stock

Gamewell / FCI XP95-P Sensor Analog Addressable Photoelectric Sensor/
Apollo: 55000-650APO XP95 Detector / Apollo:  SA5150-650APO Soteria Detector

The XP95-P have been discontinued by the manufacturer –   these are reconditioned units with a one year guarantee ! 

The Gamewell / FCI XP95-P Sensor analog addressable photoelectric sensor operates with the Gamewell-FCI, 600 Series and ILI95-E3 Series Fire Alarm Control Panels (FACPs). The photoelectric sensor digitally transmits its address and the chamber’s analog values to the FACP for analysis. The photoelectric sensor is distinguished by the clear status LED, which flashes red briefly when the device is polled and turns on continuously when the device is in alarm.

Compatible bases: 

Gamewell / FCI (XP95-B4) 4.0″ mounting base
Gamewell / FCI (XP95-B6EZ) 6.0″ mounting base
Gamewell / FCI (MB-RLYT-AA) 6.0″ relay base (four-wire)
Gamewell / FCI (MB-SDRT-AA) 6.0″ Sounder Base

If you should have any questions regarding this, or any life safety device, please contact the Life Safety Consultants team at  (888) 557-0558 or email us at sales@lifesafetycom.com

Additional information

Weight .1 lbs
Dimensions 5 × 5 × 2 in
Manufacturers

Gamewell
Condition

Reconditioned with one year warranty !

 

 

 

 

 

Specifications

Standby Current: 340 µA Alarm

LED Current: 0.00434 A

Remote Alarm Output: 0.004 A @ 5 VDC Temperature Range: 32°F to 140°F (0° C to 60° C)

Relative Humidity: (non-condensing) 0% to 95%

Recommended Spacing: Meets the 30 ft. ( 9.1 m) spacing guidelines in NFPA 72 Chapter 2. However, this spacing is based on ideal conditions and is to be used as a layout guide only. Appropriate installation-specific engineering is required.

 

Features

  • Compatible with the following Gamewell-FCI analog addressable fire alarm control panels
    • 600 Series
    • ILI95-E3 Series
  • Fits in 4.0″ (10.16 cm) or 6.0″ (15.24 cm) ultra-low- profile E-Z fit bases
  • Includes an audible alarm sounder base
  • Contains a four-wire relay base
  • Stores the address in the sensor base
  • Sets the address by an XPert addressing card
  • Provides a two-color status LED
  • Offers an infrared smoke sensing design
  • Transmits continuous communications
  • Includes an optional remote LED

You may also like…

Related products